GPS Land Measuring Instrument Multi-function GNSS GPS HandHeld Land
Navigator Agriculture Surveying Device
System Setting of GPS Land Measuring Instrument:
Slope Setting
1. In the home screen of the device, press the [Set] button to
enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Parm.
Setting",and press the [Enter] button to enter.
3. After entering the interface of "Parm. Setting", press the
[Enter] button to enter "System Setting".
4. After entering the interface of "System Setting",it turns out
slope setting, then press the [▲][▼] button to switch on or off.
5. Please press the "power" button to exit after setting.
Note:When you need to measure slope,the slope setting should be ON.
Slope Setting Interface
Unit Setting
1. In the home screen of the device, press the [Setting] button to
enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Parm.
Setting",and press the [Enter] button to enter.
3. After entering the interface of "Parm. Setting", select "Unit
Setting" and enter.
4. After entering the interface of "Unit Setting", press the
[Enter] button to switch the unit that need to be changed, and
press the [▲][▼] button to change the specific content.
5. Please press the "power" button to exit after setting.
Unit Setting Interface
Display Format
1. In the home screen of the device, press the [Setting] button to
enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Parm.
Setting",and press the [Enter] button to enter.
3. After entering the interface of "Parm. Setting", select "Display
Format" and enter.
4. After entering the interface of "Display Format", press the
[▲][▼] button to choose the display format that you need.
5. Please press the "power" button to exit after setting.
Display Format Setting Interface
Shift Parameter
1. In the home screen of the device, press the [Setting] button to
enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Shift
Parameter",and press the [Enter] button to enter.
3. After entering the interface of "Shift Parameter", select and
enter.
4. After entering the interface of " Shift Parameter", press the
[Enter] button to switch the parameter that need to be changed, and
press the [▲]
[▼] button to change the specific content.
5. Please press the "power" button to exit after setting.
Gaussian Parameter Setting Interface
Elevation Calibration
The S series adopts barometric altimetry technology, which needs to
be calibrated when accurately reaching absolute altitude.
1. In the home screen of the device, press the [Setting] button to
enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Parm.
Setting",and press the [Enter] button to enter.
3. After entering the interface of "Parm. Setting", select "ASL
Calibration" and enter.
4. After entering the interface of "ASL Calibration" and adjust the
actual height by pressing the [▲][▼] button with reference to the
known height.
5. Please press the [Enter] button to exit after setting.
