GPS Land Terrain Multifunctional Accurate Positioning Survey Grade
Handheld GPS
Technical Parameters Of Survey Grade Handheld GPS:
| Receiver Chip | High Sensitivity GNSS Receiver Chip |
| Receiver Antenna | Taimeng Passive Large - Size flat plate antenna |
| Positional Time | Hot Start Time: one Second; Cold Start Time: 30 Seconds |
| Positional Accuracy | Within 2 Meters (HDOP Value Less Than 1.0) |
| Area Accuracy | Measurement error is not more than 0.03 Mu (1-3 Mu), 2% (More Than
3 Mu) |
| Distance Accuracy | Within one Meter (When HDOP value is less than 1.0, measure the
length of 100 meters) |
Functional Characteristics
| Coordinate Measurement, Route Edit, Track Record, Navigation
Function, Altitude Measurement,
Area Measurement, Distance Measurement,
Lofting Function |
| Data Statistics | Area Statistics, Distance Statistics |
| Area Record | 99 pieces | Waypoint Record | 2000pieces |
| Distance Record | 99 pieces | Track Record | 100pieces |
| Route Record | Maximum Number Of Editions 200, Single Route Up To 400 Points |
| Track Display | The trajectory will be displayed in real time during the
measurement process, and the past measurement figures can also be
viewed in the statistical records. |
Equal Distance Lofting And Equal Division Lofting Creation:
By setting the number of lofting points or the distance between
lofting points to achieve equal or equidistant
1. In the home screen of the device, press the [Setting] button to
enter the setting interface.
2. Please press the [▲][▼] button to move to "Route",and press the
[Enter] button to enter.
3. After entering the interface of "Route", select to enter
"Establish ", select the starting point and end point of the
lofting, and press the [Start/ Stop] button to establish a new
route.
4. Then select "Lofting Edit" and enter, select the newly
established route, press the [Enter] button to enter.
5. Equal Division Lofting, please press the [Enter] button to edit, and then use the [▲][▼]
and [Enter] buttons to set the number of lofting points.
6. Equal Distance Lofting, please press the [Enter] button to edit, and then use the [▲][▼]
and [Enter] buttons to set the equidistance distance.
7. After the point setting is completed, press the [Start/ Stop]
button to create an equal distance lofting. After the creation is
completed, press the [Enter] button to save.
